[news:entitle] -杏耀注册

[news:entitle]

cause: the temperature is too low

treatment: adjust the temperature;

reason: h / b head groove is too deep or h / b head specifications

remedy: confirm h / b head groove depth or specification

reason: h / b head dirty

treatment: wash the h / b head

reason: h / b head height is too high

remedy: re-adjust the h / b head height

reason: h / b head around the wrong position

remedy: re-adjust the left and right positions (for sx-hb18-05, sx-hb19-01)

reason: too little tin or wire offset

treatment: increase the amount of tin and welding fixture and wire position

reason: welding fixture or h / b head flatness uneven

treatment: re-adjust the h / b head flatness and confirm the welding fixture flatness

cause: when the core line is not pre-coated with tin

treatment method: to confirm the pre-operating practices, wire flux and tin

cause: the h / b head is not aligned with the solder joint

remedy: re-adjust the h / b head and solder joint position