[news:entitle] -杏耀注册

[news:entitle]

approach: 

1) remove the knife edge wear, please replace the tool.

2) wire is not laser open

3) the laser head is not aligned with the handle position

4) removal of the blade is greater than the core od, the wire is not removed

5) tail line is too long, too much wire resistance

6) the upper and lower sides of the tape is not sticking loose release, transfer when the wire is not force, can not move away

7) the tail is too short to stay

8) on / under the laser mouth dislocation

9) tape remaining too long

10) the upper / lower fixed tool holder clearance is too small to divert the blade gap too large

11) remove the knife pressure to the small steel plate

12) small steel sheet front gap tape is not compressed.