common problems and solutions -杏耀注册

services

contact details

dongguan company

phone：0769-85158981

fax：0769-89339099

add：humen town, dongguan city, huai de village, daokeng industrial zone, north road

tel：13925823711（mr.yao）

tel：13925821404（mr.chen）

suzhou company

phone：0512-66193598

fax：0512-66193597

add：jiangsu province, wuzhong district, luzhi town, dongzhuang road 19-1

tel：18676957439（mr.liu）

you are here：home > services> common problems and solutions

can not move machine?

approach:1. the foot switch or the input signal is bad or faulty, reconnected or repaired, replaced;2. machine internal components aging or failure, return repair repair aging or faulty components...

2017-3-10

transfer machine moved when the wound was broken core?

approach:1) will move the knife tip up2) remove the knife-edge dirty, need to clean3) remove the knife does not match the core od, please replace the corresponding removal of the blade4) laser mouth and move the knife edge position is not aligned, mo...

2017-3-10

moved outside the machine was not moved away?

approach: 1) remove the knife edge wear, please replace the tool.2) wire is not laser open3) the laser head is not aligned with the handle position4) removal of the blade is greater than the core od, the wire is not removed5) tail line is too lo...

2017-3-10

machine can not be moved？

approach:1) check whether the weaving laser;2) whether the pressure cylinder block is pressed;3) clipping jaw distance is within 2.5-3mm....

2017-3-10

removal machine weaving indentation？

approach:

1) whether the cylinder stroke is too small;

2) pneumatic pressure is too large

2017-3-10

sticky tin weaving / core front or root tin block？

approach:1) after the pull distance is too short;2) after the pull speed too fast;3) dip tin distance parameter setting is too small;4) tin furnace temperature is too low;5) whether to mention the speed too fast, can be properly adjusted;6) whether t...

2017-3-10

prev page6/7next page